Skip to the content

INDENT variable speed drive IP55 4KW 400v/480v

SKU: ATV650U40N4

Brand: Schneider

Guide and Documents

Product Specifications

Manufacturers Part Number ATV650U40N4
Primary Stock Unit Each
Supplier Schneider
Product or Component Type Variable Speed Drive
AC Voltage 480V
Acceleration and Deceleration Ramps linear adjustable separately from 0.01...9999 s
Amps 10A
Analogue Input Number 3
Associated Fuse Rating 16 A
Base Load Current At High Overload 7.2 A
Base Load Current At Low Overload 9.3 A
Brake Chopper Integrated False
Braking To Standstill By DC Injection
Capacity of DC Link 410 µF
Communication Port Protocol Modbus Serial,Modbus TCP
Computer Port True
Data Format 8 Bits
Depth 272mm
Design of Frequency Changer U Converter
Device Short Name ATV650
Discrete input Logic 16 preset speeds
Discrete input Number 8
Discrete Output Number 0
EMC Limit Value (complied) True
Environmental Class (During Operation) Class 3C3 According To IEC 60721-3-3/Class 3S3 According To IEC 60721-3-3
Environmental Class (During Storage) Class 1C3 According To En 60721-3-1/Class 1S2 According To En 60721-3-1
Environmental Class (During Transport) Class 2C3 According To En 60721-3-2/Class 2S1 According To En 60721-3-2
Hexagonal Across Flats (mm) 678 mm
Input AC/DC AC
Input Current 7.6 A
Input Voltage 480V
IP Rating IP55
IP Rating Info IP55
Isolation Between Power and Control Terminals
Marking CE
Max Acceleration Under Shock Impact (During Operation) 150 m/s² at 11 ms
Max Acceleration Under Shock Load (During Storage) 150 m/s² at 11 ms
Max Acceleration Under Shock Load (During Transport) 150 m/s² at 11 ms
Max Acceleration Under Vibrational Stress (During Operation) 10 m/s² at 13...200 Hz
Max Acceleration Under Vibratory Load (During Storage) 10 m/s² at 13...200 Hz
Max Acceleration Under Vibratory Load (During Transport) 10 m/s² at 13...200 Hz
Max Deflection Under Vibratory Load (During Operation) 1.5 mm at 2...13 Hz
Max Deflection Under Vibratory Load (During Storage) 1.5 mm at 2...13 Hz
Max Deflection Under Vibratory Load (During Transport) 1.5 mm at 2...13 Hz
Motor Slip Compensation Not Available In Permanent Magnet Motor Law|Automatic Whatever The Load|Can Be Suppressed|Not Available In Permanent Magnet Motor Law
Motor Starter Type Variable Speed Drive
Mounting Surface Mount
Mounting Mode Wall Mount
NEMA Degree Of Protection NEMA 1
Network Frequency 50...60 Hz
Noise Level 52dB
Nominal Output Current 9.3 A
Nominal Output Power 4kW
Nominal Switching Frequency 4;kHz
Number of HW interfaces industrial Ethernet 1
Number of HW Interfaces Serial RS485 1
Number of Input Phases 3
Number of Output Phases 3
Number of Phases 3 Phase
Operating Element Present True
Operating Position Vertical +/- 10 Degree
Optical Interface Present False
Output Frequency 500 kHz
Overvoltage Category III
Permitted Relative Humidity (During Operation) Class 3K5 According To EN 60721-3
Permitted Relative Humidity (During Storage) Class 1K5 According To EN 60721-3
Permitted Relative Humidity (During Transport) Class 2K5 According To EN 60721-3
Physical Interface Ethernet;2-Wire RS 485
Pollution Degree 3
Power Loss Per Device Current Dependent 142 W
Power Loss Static Current Independent 14 W
Product Certifications ABS|TÜV|DNV-GL|Bureau Veritas|UL|CSA|ATEX INERIS
Product Destination Asynchronous Motors/Synchronous Motors
Product Specific Application process and utilities
Prospective Line ISC 50 kA
Quantity Per Set 1
Range or Series Altivar Process ATV6
Regulation Loop Adjustable PID Regulator
Relative Symmetric Mains Voltage Tolerance 10 %
Relative Symmetric Network Frequency Tolerance 5%
Relay Output Number 3
Specific Application Utility
Standards EN/IEC 61800-3;EN/IEC 61800-3 environment 1 category C2;EN/IEC 61800-3 environment 2 category C3;EN/IEC 61800-5-1;IEC 61000-3-12;IEC 60721-3;IEC 61508;IEC 13849-1;UL 508C
Supporting Protocol for AS-Interface Safety at Work False
Supporting Protocol for ASI False
Supporting Protocol for BACnet False
Supporting Protocol for CAN True
Supporting Protocol for Data-Highway False
Supporting Protocol for DeviceNet False
Supporting Protocol for DeviceNet Safety False
Supporting Protocol for EtherNet/IP True
Supporting Protocol for Foundation Fieldbus False
Supporting Protocol for INTERBUS False
Supporting Protocol for INTERBUS-Safety False
Supporting Protocol for KNX False
Supporting Protocol for LON False
Supporting Protocol for MODBUS True
Supporting Protocol for other bus systems False
Supporting Protocol for PROFIBUS True
Supporting Protocol for PROFINET CBA True
Supporting Protocol for PROFINET IO True
Supporting Protocol for PROFIsafe False
Supporting Protocol for SafetyBUS P False
Supporting Protocol for SERCOS False
Supporting Protocol for SUCONET False
Supporting Protocol for TCP/IP True
Synchronous Motor Control Profile synchronous reluctance motor|permanent magnet motor
Transmission Frame RTU
Transmission Rate 10,100 Mbits|4800 bps,9600 bps,19200 bps,38.4 Kbps
Type of Cooling Forced Convection
Type of Polarization No Impedance
[Us] Rated Supply Voltage 380...480 V
Variant Standard Version
Voltage 380V-480V AC
Wattage 4kW
Width 264mm

While every effort has been made to ensure the accuracy of the product specifications listed on this page, we hold no responsibility for any errors or omissions.
We highly recommend verifying the details directly with the manufacturer to ensure the most up-to-date and accurate information.

___________________________

CUSTOMER SERVICES

Contact Us
My Account
Open a Trade Account
Shipping
Returns

___________________________

POPULAR BRANDS

PDL
ABB
Schneider
Klein Tools
Philips
Allen-Bradley
Simx
Prysmian
Trical

___________________________

INTEGRATION PARTNERS

Fergus
Simpro
Integration queries

Account


REGISTER FOR A BUSINESS ACCOUNT

Register


Locations